Length: 555 / 662 mm

Weight: 2615 g

Color: Black

Material: Zinc and aluminum alloy, steel, polymer

Muzzle Velocity: ~410 FPS / ~310 FPS

Quick Spring Change System - Enter & ConvertT

Manufacturer: Specna Arms

SA-H07 Carbine Replica

SA-H01 carbine replica by Specna Arms is made largely of a uniform zinc and aluminum alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). Both the stock pad and the pistol grip were made of polymer. The receiver of the replica and RIS handguard have undergone the process of anodizing, which guarantees a high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the process of sandblasting prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion. The receiver bears manufacturer markings.

The replicas parts are very well aligned - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for an almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered.

The replica features a quick spring release system, so-called Enter & ConvertT. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - once the gearbox has been taken out of the replicas body, the process of spring change lasts literally seconds.

The advantages of Enter & ConvertT system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the User a varied set of possibilities and plenty of freedom. Enter & ConvertT system allows with a minimal amount of time to change the main spring, thusly customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. Due to the base muzzle velocity of ~430 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range. The set also includes an M90 spring, which allows to reduce the muzzle velocity to ~310 FPS and as a result to adapt the replica for close-ranged and indoor operations.

A reinforced at the cylinder level gearbox contains a steel spring slide that is an element of Enter & ConvertT system and mounted on 8 mm ball bearings and washers steel gears. The system is secured with four anti-reversal latches. A light, made of polycarbonate polymer, piston is equipped with a steel tooth in order to increase its durability. Also, a type 2 cylinder and a steel circuit-breaker, as well as a metal Hop-Up chamber.

The replica is equipped with a top RIS 22 mm rail, RIS handguard and an adjustable stock. The top RIS rail features metal flip-up iron sights, which can be freely detached in order to make room for the attachment of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip stock pad, it is possible to adapt the replicas length to the body type and preferences of the User. Standard flash hider is based on a 14 mm left-handed thread, which allows the attachment of a silencer in its place.

In order to enhance the realism of the game, the replica also features an operational bolt-catch mechanism.

The 07 version features a foldable stock mounted on slides, which significantly reduces the length of the replica making it an ideal tool for CQB combat. This, however, forces the movement of the battery included in the set into a mock AN/PEQ sight casing in the front of the replica. The handguard of the replica has a RIS rail with M-Lock system that allows for individual adaptation of the RIS rail position to the User preferences.

The replica comes with a steel, 300 BB, Hi-Cap magazine.

Specna Arms replicas are compatible with many magazines available on the market, from manufacturers like:

- BOYI,

- SRC,

- King Arms,

- MAG,

- STAR,

- ACM.

Additional accessories visible in the preview photographs are not part of the set!

The set includes:

- replica

- magazine

- fixed iron sights

- additional main spring

The set does not include a battery or a charger.

Name:Replika karabinka SA-H07

Manufacturer:Specna Arms

Warranty:12 months

Velocity [FPS]:~400 / ~310

Gearbox version:Modified v2 Gearbox

Type of fire:Single, auto

Lenght [mm]:555/662

Weight [g]:2615

Magazine type:Hi-Cap magazine

Magazine capacity [pcs]:300

Hop-Up:Yes, adjustable

Blow Back:No

Made of:Metal + plastic + steel

Battery included:No

Propulsion / Powered by:Electric

Barrel thread type:14mm CCW

Quick Spring Change System:TAK

Rango de frecuencia: 65 - 108 MHz (solo la recepción de radio FM comercial) VHF: 136 - 174 MHz (RX/TX). UHF: 400 - 520 MHz (RX/TX)

Broad (ancho)/banda estrecha (Narrow), de alta potencia/bajo (5 W/1 W), seleccionable

Alto & bajo potencia a Commuter; Copia de seguridad de batería; Función VOX; Selección de la franja amplia/estrecho; Luz en parte trasera automático; Suspensión de dos bandas

Temporizador de time-out (tot); 50 CTCSS y 104 DCS códigos; Mensaje de voz; Código ani; Programa por PC o manual DTMF código; PTT-ID; Bloqueo automático del teclado

Bloqueo de canales ocupados; Alarma de emergencia; Función de Scanning por avance; relé de avance confirmado (1750 Hz); Aviso de batería baja; Cruz u/V banda y doble veilles